Item Description
Product Description:
1.Flexspline is a hollow flanging standard cylinder construction.
two.There is a big-diameter hollow shaft gap in the center of the cam of the wave generator. The inside design and style of the reducer has a support bearing.
three.It has a totally sealed structure and is effortless to install. It is quite suitable for the situations where the wire wants to be threaded from the center of the reducer.
Advantages:
The initial:High precision,higher torque
The next:committed specialized staff can be on-the-go to offer style options
The third:Factory immediate revenue wonderful workmanship durable high quality assurance
The fourth:Merchandise quality problems have a a single-calendar year guarantee time, can be returned for alternative or mend
Firm profile:
HangZhou CZPT Technological innovation Co., Ltd. recognized in 2014, is dedicated to the R & D plant of substantial-precision transmission elements. At existing, the annual generation capacity can reach 45000 sets of harmonic reducers. We firmly think in quality 1st. All backlinks from uncooked supplies to completed merchandise are strictly supervised and managed, which gives a strong basis for item high quality. Our products are offered all above the country and abroad.
The harmonic reducer and other large-precision transmission elements were independently created by the business. Our business spends 20% of its product sales each and every yr on the investigation and improvement of new systems in the sector. There are 5 people in R & D.
Our advantage is as under:
one.7 many years of advertising experience
2. 5-person R & D group to offer you with specialized help
3. It is offered at house and overseas and exported to Turkey and Ireland
four. The item high quality is confirmed with a one-calendar year warranty
five. Goods can be tailored
Energy factory:
Our plant has an whole campus The amount of workshops is around 300 Regardless of whether it’s from the creation of raw materials and the procurement of raw materials to the inspection of completed merchandise, we are doing it ourselves. There is a total creation technique
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start quit | The allowable highest of the average load torque | Maximum torque is permitted in an instantaneous | Let the greatest pace to be entered | Common enter velocity is authorized | Again hole | design and style daily life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | six.2 | .six | 20.seven | two.one | 7.nine | .seven | forty.3 | 4.one | 7000 | 3000 | ≤30 | 10000 |
eighty | 9 | .9 | 27 | two.seven | 12.7 | one.3 | fifty four.one | five.5 | |||||
one hundred | nine | .9 | 32 | 3.three | twelve.seven | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.four | 1.nine | 39 | 4 | 29.nine | three | 80.5 | eight.2 | 6500 | 3000 | ≤30 | 15000 |
eighty | 25.three | 2.6 | 49.five | 5 | 31 | 3.two | one hundred.one | ten.two | |||||
a hundred | 27.6 | 2.8 | sixty two | 6.3 | forty five | four.6 | 124.2 | twelve.seven | |||||
20 | 50 | 28.8 | 2.nine | 64.4 | 6.6 | 39 | 4 | 112.7 | eleven.5 | 5600 | 3000 | ≤30 | 15000 |
eighty | 39.one | four | eighty five | eight.eight | 54 | five.five | 146.1 | 14.nine | |||||
one hundred | 46 | 4.seven | 94.3 | nine.six | 56 | 5.8 | 169.one | 17.two | |||||
120 | forty six | four.seven | 100 | 10.2 | fifty six | 5.eight | 169.one | seventeen.two | |||||
a hundred and sixty | forty six | four.seven | a hundred | ten.two | 56 | five.8 | 169.one | seventeen.two | |||||
25 | 50 | 44.nine | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.eight | 4800 | 3000 | ≤30 | 15000 |
80 | seventy two.5 | seven.four | 158 | sixteen.1 | 100 | ten.two | 293.three | 29.9 | |||||
one hundred | seventy seven.1 | seven.9 | 181 | 18.four | 124 | twelve.seven | 326.6 | 33.3 | |||||
one hundred twenty | seventy seven.one | 7.9 | 192 | 19.six | 124 | twelve.seven | 349.six | 35.6 | |||||
32 | fifty | 87.four | 8.nine | 248 | 25.3 | 124 | 12.seven | 439 | forty four.eight | 4000 | 3000 | ≤30 | 15000 |
eighty | a hundred thirty five.seven | 13.eight | 350 | 35.six | 192 | 19.6 | 653 | sixty six.six | |||||
one hundred | 157.six | sixteen.one | 383 | 39.1 | 248 | twenty five.three | 744 | 75.9 | |||||
40 | one hundred | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start off quit | The allowable maximum of the average load torque | Maximum torque is permitted in an immediate | Allow the greatest velocity to be entered | Common input speed is permitted | Back again hole | design daily life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | .seven | 23 | 2.three | 9 | .9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
eighty | ten | one | 30 | three.one | 14 | one.four | 61 | six.2 | |||||
100 | ten | 1 | 36 | 3.seven | fourteen | one.4 | 70 | seven.2 | |||||
17 | fifty | 21 | 2.1 | forty four | 4.five | 34 | 3.four | ninety one | nine | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | two.nine | fifty six | five.7 | 35 | 3.six | 113 | 12 | |||||
one hundred | 31 | three.two | 70 | seven.two | 51 | five.two | 143 | fifteen | |||||
20 | fifty | 33 | 3.three | 73 | 7.4 | 44 | 4.5 | 127 | thirteen | 10000 | 6500 | ≤20 | 20000 |
eighty | 44 | four.5 | ninety six | nine.8 | sixty one | six.two | one hundred sixty five | 17 | |||||
one hundred | fifty two | 5.three | 107 | ten.nine | 64 | six.5 | 191 | twenty | |||||
a hundred and twenty | fifty two | five.3 | 113 | 11.five | sixty four | 6.five | 191 | 20 | |||||
a hundred and sixty | 52 | five.3 | one hundred twenty | twelve.2 | 64 | 6.five | 191 | twenty | |||||
25 | fifty | fifty one | five.two | 127 | thirteen | 72 | 7.three | 242 | twenty five | 7500 | 5600 | ≤20 | 20000 |
eighty | 82 | eight.four | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | one hundred forty | 14 | 369 | 38 | |||||
one hundred twenty | 87 | eight.nine | 217 | 22 | one hundred forty | fourteen | 395 | forty | |||||
32 | fifty | 99 | 10 | 281 | 29 | one hundred forty | fourteen | 497 | fifty one | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | forty | 217 | 22 | 738 | seventy five | |||||
100 | 178 | eighteen | 433 | forty four | 281 | 29 | 841 | 86 | |||||
forty | 100 | 345 | 35 | 738 | 75 | 484 | forty nine | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibition:
Software circumstance:
FQA:
Q: What ought to I supply when I decide on gearbox/pace reducer?
A: The ideal way is to give the motor drawing with parameter. Our engineer will examine and advise the most appropriate gearbox product for your refer.
Or you can also provide underneath specification as effectively:
1) Variety, product and torque.
2) Ratio or output velocity
3) Functioning issue and relationship approach
4) High quality and set up device identify
five) Input method and input velocity
six) Motor brand name product or flange and motor shaft dimension
US $238.1 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
US $238.1 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | %
Tags:
|