Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where an easy to fit, high torque result is required. Ideal for student based assignments including robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The electric motor is snap fitted into its cradle to activate the gear and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and other applications where substantial torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them perfect candidates for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, actually at suprisingly low voltages. We advise that you use stall-detection sensors, or simply see your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not particularly intended to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors arranged new standards for reliability, effectiveness and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration right now and a truly future proof solution. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box can be mounted in alternate positions rotated in 90º steps around the engine frame providing for unparalleled integration options.
Ever-Power gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the result shaft of the unit.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Plug connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the remedy for applications requiring a corner turn, optional dual output, or perhaps an inability for the motor to be back again driven. The DC correct angle equipment motors are created for continuous and intermittent duty procedure. Our right angle gear reducers were created with many mounting plate choices, making them well suited for a number of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a little package size. Worm Gear Motors are great for applications that want a self- locking or breaking characteristic since the output shaft can’t rotate when there’s no power applied. On top of that, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision minimize gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
Security Door Locks / Industrial Conveying Devices / Security Gates / Teeth Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Items will work with you to design and produce a Worm Gear Motor that may optimize the overall performance of your specific application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Chop / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm electric motor runs on the metal gear box for strength and a high torque output. Because of the special mechanical framework of the worm get the electric motor output shaft is self locking and will not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their power in applications where high gear ratios are necessary. Our worm geared motors happen to be therefore optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a high overload capacity
Washdown versions enable simple and efficient cleaning of the travel system.
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its own unique requirements. The EP series worm equipment motors can be quickly and effectively adapted to fulfill your needs.
Worm gear models impress with their great power density and small design. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP housing, we offer an extensive line of bolt-on parts to customize the merchandise including torque arms, shaft addresses and output flanges. These could be easily field installed, but we will also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear products feature a even, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product ideally suited for harsh and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides distinct fixing possibilities and enable an easy assembling for the client.
Various other drive configurationscan be designed by use of built-about components (e.g. torque arm and output flanges). The housings are created in light weight construction out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a robust worm travel gearbox powered by an MM28 engine (included), most ideal for applications where a simple to fit, high torque output is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, perfect for student based tasks including robots and buggies.
Most suitable for applications where a simple to fit, high torque result is required
Ideal for student based projects including robots and buggies
Reversible Substantial torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that is, in the case of motor without electrical, the result axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear motor, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. How come worm gear so particular? Check this wiki out: Worm Travel.
“Unlike with ordinary gear trains, the path of transmission (input shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the higher friction involved between your worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This can often be a advantage when it’s desired to remove any possibility of the output driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Please call us if you need to learn even more concerning worm motor.