WORM SERVO GEAR REDUCER
Wide range of servo gearboxes, made to fit almost all servo motors on the market
Designed for the best torsional stiffness and the cheapest angular backlash, designed for the utmost torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The correct technical solution thanks to a comprehensive selection of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical models) Catalog SR
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the growth of our selection of Servo Reducers, now offering five levels of precision to meet any application requirements. The five degrees of precision offered allows a machine developer to select the required reducer precision to meet their needs and their spending budget. They are available in both in-series and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Regular applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, E and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are for sale to the complete reducer range to mount virtually any servo electric motor and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive components.
These reducers are typically selected based on the peak cycle forces, which usually happen during accelerations and decelerations. These cycle forces rely on the powered load, the speed vs. period profile for the routine, and any other external forces functioning on the axis. For more selection information, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application information will be reviewed by our engineers, who will recommend the very best solution for your application.
EP Inc. offers a full selection of modular servo gearboxes /worm reducers. The modular design permits configurations with motor insight flange and result pinion for rack and pinion drives, in addition to solid result shafts, Hollow bore output, and insight shafts for all the positioning applications. The modular style allows for universal installation of the gearbox in virtually any orientation.
They can be used on motors with a NEMA23 standard flange via an adaptor kit. As the gears are naturally angled, they lead to a short total amount of the engine and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be built on the gear’s output side.
Built with a simple and robust design, the series has gearing ratios that range between 6:1 to 75:1. The user may also customize the components through the order, in order to match the gear to its intended software.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with dual shaft, right angle shaft and right angle output, in addition to a full range of adapters for motor mounting, making them with the capacity of meeting certain requirements of even the most varied applications. They are designed for make use of with built-in servo and stepper EP motors, mounted straight or via adaptor flanges, but may also be used with other EP motor types. This range of products is based on years of experience and represents the outcome of a decade-long research aimed at improving performance.
Maximum precision and dynamics, coupled with excellent torque density, will be the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for just about any app and any performance range. Our low-backlash planetary and right-angle gearboxes reflect our interest for advancement and the best levels of precision.
Worm gear reducers provide market advance solution with performance and flexibility. Low amount of basic models can be applied to a wide selection of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are made for high-performance mechanical products. When the motor acceleration must be reduced, the result torque boosts and send torque completely to the application. We believe that customers will appreciate our gear reducer to achieve their demand. Just visit EP, you will get more details about servo gearheads, servo gearboxes, and equipment reducers. We continue to keep going forward for your support.
Plug the Velocity Reducer into the desired channel of your receiver, and connect the business lead from your own servo (or servo wye) in to the man servo lead from the circuit plank. The established screw on the blue trim pot, located near the top of the primary circuit board, is used to control the velocity of the servo. Switch the set screw completely clockwise (CW) for normal servo speed without speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial rate reduction. The crimson LED indicates three possible conditions: Slower Blinking = No Transmission; Solid On = No Quickness Decrease; Fast Blinking = Reduced Speed Setting
Please note that if you make any alter to the speed setting as the receiver is on, you must cycle capacity to the receiver (convert if off and back again on) for the brand new speed setting to take impact. This circuit may also be used in conjunction with our Servo Reverser to trigger flap or retract servos to carefully turn in opposite directions for right function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This product will only focus on a normal, proportional servo. You won’t work on a retract-type servo, because they do not acknowledge any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, actually by a transmitter which includes this function, as their style and electronics don’t allow it. Examine the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you wish to control for a far more scale-like motion of flaps or retracts. Adjustable, it can be set to lessen the acceleration of your servo from super-slow movement to no speed reduction at all, with an nearly infinite amount of positions among. Maximum reduction period for a servo to travel 90 degrees is about 14 seconds, minimum time (no reduction) is merely the normal rate of the servo. Ideal for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be used to control several servo by usage of a normal servo Y.
This is actually the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage likely to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding machines, pick and place, and linear slides.Offered in concentric shaft, correct position solid shaft, and right angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to easily mount to any manufacturer’s servo engine. The EP Series helical gears have got slanted teeth in comparison to spur gears with straight cut teeth, producing a smoother gear mesh, yielding considerably lower noise levels.
The low backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the best possible flexibility and cost-efficiency because don’t assume all application requires high-performance parts.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units are available in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 result, with keyway
Do your study … you’ll find people are totally satisfied with servo gear reducer.