Materials Dealing with Electrical power UNIT two
Common Description
This electrical power unit options energy up gravity down circuit. Activate the start off solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve with the lowering velocity controlled through the pressure compensated movement management valve. Items of this series might be extensively utilized in the marketplace of logistic devices which include fork lift, mini 
lift table, etc.
Special Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all the hydraulic parts concerned prior to mounting the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and no cost of impurities, N46 hydraulic oil is proposed .
4. Oil modifying is required just after the original a hundred operation hrs,afterwards the moment every single 3000 hours.
five. The power unit really should be mounted horizontally.
Material Managing Electrical power UNIT one
Basic Description
This power unit is intended for your fork lift industry, consisting of really productive gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are controlled through the lever of your guide release valve, that is outfitted with an electric switch to activate the motor. The lowing pace is managed from the strain compensated movement handle valve.
Special Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned in advance of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and no cost of impurities, N46 hydraulic oil is advised .
4. Oil modifying is needed immediately after the initial one hundred operation hrs, afterwards as soon as every single 3000 hrs.
5. The electrical power unit shown is designed to be mounted horizontally.