Energy UNITS FOR LIFT TABLE

Power UNITS FOR LIFT TABLE 1
Common Description
This electrical power unit is built exclusively for the tiny lift table,Consisting of substantial strain gear pump, AC motor, multi-functional manifold, valves, tank, etc. This power unit has become widely employed while in the market of logistic products such as minifork lift, scissors lift and ariel working platforms. The lower-ing movement is controlled from the solenoid valve together with the velocity managed through the adjustable needle valve.
Electrical power UNITS FOR LIFT TABLE 2
General Description
This power unit is designed solely for that medium lift table, Consisting of hugely effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The reducing movement is actived by the solenoid valve as well as the velocity controlled from the adjustable needle valve. When the lift rises to a substantial positoin, but the electrical power provide is cut, the reducing motion is controlled from the manual override perform.
Electrical power UNITS FOR LIFT TABLE 3
Standard Description
This power unit is designed exclusively for the massive lift table, Consisting of extremely effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing motion is actived from the solenoid valve plus the speed controlled by a stress compensated flow handle valve.
Power UNITS FOR LIFT TABLE 4
Basic Description
This energy unit is developed exclusively to the significant lift table, Consisting of remarkably effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The lowering movement is actived by the solenoid valve and also the speed managed by the adjustable needle valve. When the lift rises to a large positoin, but the power supply is reduce, the lowering movement is controlled from the manual override perform.
Exclusive Notes
1. This power unit is of S3 duty cycle, which may only function intermittently and repeatedly, i.e. 1 minute on and 9 minutes off.
2. Clean each of the hydraulic components concerned prior to installation of the power unit.
three. Viscosity with the oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
4. Oil transforming is required soon after the preliminary 100 operation hours,afterwards when each and every 3000 hrs.
five. The electrical power unit proven is intended to be mounted vertically.