DUMP TRAILER Power UNIT-DOUBLE ACTING
Basic Description
This energy unit has a power up energy down circuit with load holding on both A & B ports. A stress compensatred flow handle is usually additional to circuit to manage the decent speed of your cylinder.
Unique Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned just before set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is proposed.
4. The energy unit should be mounted horizontally.
5. Check the oil degree from the tank soon after the initial running of the power unit.
6. Oil transforming is required after the preliminary a hundred operation hrs, afterwards as soon as every 3000 hours.

DUMP TRAILER Electrical power UNIT- SINGLE ACTING
Common Description
This power unit features a energy up gravity down circuit. Begin the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be provided if needed. Also a stress compen sated flow control is usually extra for the circuit to regulate the descent velocity in the cylinder.
Remark: Please check with our revenue engineer for that various pump displacement, motor energy or tank capacity.
Special Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic elements concerned ahead of set up of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
4. The electrical power unit must be mounted horizontally.
five. Check the oil level while in the tank just after the initial working on the energy unit.
6. Oil altering is required following the initial 100 operation hrs, afterwards as soon as every 3000 hours.